+Procedure to treat Hard surfaces spills  
 
   
PROCEDURE:
 

Spread enough ANFE-SORB on the spill, enough to fully cover it until it is absorbed. In windy conditions, spread upwind and more across the spill downwind at a height no more than 6 inches from surface. You can leave ANFE-SORB on the spill for up to 20 minutes until it is fully absorbed or you can agitate the ANFE-SORB on the spill and watch it dry faster, usually within 5 minutes. Sweep up, place in suitable container and dispose of according to regulations. Please note, ANFE-SORB does not only absorb hazardous chemicals but it is also a highly efficient VAPOR SUPPRESSOR. It also neutralizes the flammability of Gasoline, Diesel and Jet Fuels once it is absorbed by ANFE-SORB making it safer to dispose of.

  
       
 
       

ANFE-SORB meets or exceeds EPA requirements Fed.Req./Vol 57, No. 223, c/o CFR Parts 260, 265, 271. Meets or exceeds Coast Guards requirements for usage of natural absorbent.

Due to variety of liquid and chemicals involved in spills, we cannot recommend disposal procedures. However, ANFE-SORB can be incinerated or land farmed in accordance with federal, state and local regulations.

With governments increased concern over the environment, the laws protecting the environment are becoming stricter each year. Our products provide a NATURAL BIOREMEDIATION and ABSORBENT SOLUTIONS.

  

ANFE-SORB crops are grown using low input sustainable agriculture and meets Executive Order 13101 identifying our products as environmentally preferable for Government Purchasing.

The environmental friendly alternative. Not harmful to the environment, NO depletion of natural resources. THE BEST granular organic absorbent product available. Superior performance and biodegradable.

The lower cost solution for more efficient clean up of land, water and hard surface spills and for restoring contaminated sites.